M508
Programmable UV-VIS spectrometer for reliable analyses in research and industry
The basic programmable UV-VIS spectrometer for routine operation
Our new programmable UV-VIS spectrometer M508 is designed for easy routine operation with focus on high robustness. The manual spectrometer has a wavelength range of 200-1000 nm and a spectral bandwidth of 4 nm with low stray light (<0.1 %T at 220 nm & 340 nm).
It has a four-line LCD display with 20 characters, a keypad with nine keys and stepper motors for wavelength and filters.
It allows storage of up to 200 methods for extensive analysis projects.
Some of the functions of the M508 at a glance:
- Stores up to two hundred methods/results
- Concentration calibration with up to eight standards and up to three repeats
- Selectable wavelength calibration and dark current measurement
- Wavelength range 200 – 1000nm
- bandwidth 4nm
- Low stray light (<0.1%T at 220 nm and 340 nm)
- Large sample compartment (for cuvettes up to 100 mm path length)
- Manual 4-cell changer & four 10mm glass cells included
- Wide range of accessories
- Optional software for wavelength scan, concentration curves, DNA/protein measurements, kinetics mode and multi-wavelength test
Type: manual UV-VIS Spectrophotometer
Spectral range: 200 – 1000 nm
Wavelength Accuracy: ± 2 nm
Wavelength Repeatability: ± 1 nm
Bandpass: 4 nm
Noise: < 0.001A @ 500 nm
Zero Drift: < 0.003A/h after warm up
Stray Light: <0.1%T at 220 nm and 340 nm
Photometric Range: -1 – 2.5 A, 0-125%T
Photometric Accuracy: ±1%, 0-2 A
Light source: Tungsten-Halogen
Detector: Silicon Photodiode
Monochromator: 1200 lines/mm grating
Connectivity: USB, RS 232
User Interface: 4 lines x 20 character LED
Size: 510 mm x 420 mm cm x 210 mm (packed 645 mm x 535 mm x 370 mm)
Weight: 14 kg (packed 17 kg)
The M508 includes the following articles:
- 4 Position 10 mm cell changer
- 4 x glass cells
- 2 x Quartz cells
- dust cover & user manual
Accessories:
- Test tube v-type holder (for 100 mm long tubes with 8-25 mm diameter)
- Adjustable micro-cell holder
- 4 cell holder for 5-50 mm cells
- 4 cell holder for 100 mm cells
- Holder for 1 x 100 mm cylindrical cell
- Thermostatted 10 mm cell holder (requires water bath)
- Processor controlled sipper (requires flow cell)
- Peltier system for 10 mm cells (15-40 °C)
- Cell stirrer for 10 mm cells
- Printer (RS 232)
- control & measurement software (plain software or preinstalled on a PC)
not available
If you are interested in further information you can contact our service department using the contact form.